Filter
Top Products
38
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Setting up an auxiliary (AUX) source
Once your AUX source device is connected to the
Lifestyle
®
system, you can set up the remote to control
that source. Then, when you are watching video from
that source, the Lifestyle
®
remote should control most
of the functions of that source.
Programming the Bose
®
remote to control
the AUX device
Setting up the remote to control the AUX device
involves selecting the correct AUX device code, then
setting the AUX device to turn on automatically when
the Lifestyle
®
system is turned on.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn on the AUX device.
3. On the Lifestyle
®
remote, press AUX.
4. Make the system menu appear on the TV by
pressing System.
5. Move across the menu tabs to Setup by pressing
the right arrow.
6. Move down to AUX Device and press ENTER.
7. Select the type of device from the list and press
ENTER.
8. Move down to AUX Brand and press ENTER.
9. Select the brand of your device and press ENTER.
10. Move down to AUX Code and press ENTER.
11. Select the first device code in the list.
12. Press the (AUX) On/Off button (located under the
AUX button).
• If the AUX device turns off, you have chosen the
correct code.
• If the device does not turn off, select the next
code and press (AUX) On/Off again.
Continue selecting codes until you find one
that works.
13. When you have a working code, enter it below, then
press ENTER.
AUX Code: ____________________
14. To exit the system menu, press Exit.
You can now use the Lifestyle
®
remote to control your
auxiliary device.