Bose 525p 625p Home Theater System User Manual


 
USING SYSTEM MENUS
37
!!
U
SING SYSTEM MENUS
Dansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Video options
Press
System
on the LIFESTYLE
®
remote control. Move right to see a preview of video features,
and press the
Enter
button to move into the active list of video options.
Figure 18
Preview of video features
Video
01#?-B(/
01#?-B(/#'+"+.@
01#%@E(*+#<"+;-
G;3(@*/((2#919@
1;3(-#6-22(*+-/
1;3(-#&)"*H#7(:()
01#1;3(-#R-/>"+
?/-O/(@@;:(#'*"2
'()(*+#1;3(-#+-#"3K.@+#+A(@(#@,@+(>#-E+;-2@5
Note: DO NOT change settings for
component video using the on-screen
System menu shown here. On some TVs,
the screen will be blank until you make
this change.
Refer to “Component system setup using
the display” on page 13.
navigate
select
ADAPTiQ
®
Off
(On
Erase)
No ADAPTiQ audio calibration performed.
Uses ADAPTiQ system adjustments established using Disc 2.
Eliminates the ADAPTiQ system adjustments* when this selection is
followed, within 5 seconds, by pressing the
Erase
button on the media
center control panel.
Expansion Protocol
Change this only if instructed
in the owner’s guide supplied
with your Bose
®
link remote
control.
Bose
®
link
(Legacy)
Communicates only with Bose link-compatible products in other
areas or rooms of your house.
Allows the system to communicate with Bose legacy products (like
Wave
®
radios or Wave
®
radio/CDs, which pre-date Bose link compati-
bility) and with some non-Bose products in other areas or rooms of
your house.
Active list of options
Default settings
(Options)
Effect of this setting
TV Power Automatic
(Manual
Euro)
TV turns on automatically when a video source is selected.**
TV does not come on automatically.
TV responds to SCART connector input.
TV Power Status
(indicator only; not a setting)
TV Not Detected
(TV On)
Indicates: TV Sensor not installed or not positioned correctly.
Indicates: TV Sensor installed and functioning properly.
TV Aspect Ratio Normal
(Widescreen)
4:3 ratio screen display.
16:9 ratio widescreen display.
* Elimination of ADAPTiQ system adjustments is NOT automatically reversible.
Restoring these adjustments requires re-use of the Setup Disc 2 and the ADAPTiQ system headset supplied with the
system. For information on how to use this process, refer to “Making sure the sound is as good as it gets” in your !
Installation Guide.
Through use of this advanced feature, the LIFESTYLE
®
system self-adjusts its audio processing to compensate for the
furnishings, speaker placement, and positions of listeners to provide ideal sound in your main room.
**The Automatic feature works only after the optional TV sensor is installed and positioned to detect if the TV is on or off.
For information on using the TV sensor, refer to “Installing the TV on/off sensor” in your Installation Guide.