Filter
Top Products
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
25
CARE AND MAINTENANCE
Replacing the CineMate
®
series II remote battery
Replace the battery when the remote control stops
operating or its range seems reduced. Insert a CR2032
or DL2032 battery into the compartment on the back of
the remote control.
1. Using a coin, turn the battery cover slightly
counterclockwise.
2. Remove the used battery and replace with a new
battery (CR2032 or DL2032). Refer to page ii for
battery safety instructions. Be sure the battery is
flat side up, with the + symbol in view.
3. Re-seat the cover and turn it clockwise until it
locks into place.
00.Kaiser_OG.book Page 25 Friday, May 15, 2009 7:15 AM