Filter
Top Products
30 - English
Care and Maintenance
Replacing the remote batteries
CineMate
®
15 system remote
Replace both batteries when the remote control stops operating or its range seems
reduced. Use Alkaline batteries.
1. Slide open the battery compartment cover on the back of the remote.
2. Remove both batteries.
Dispose of the batteries according to the regulations in your area.
3. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match the + and –
symbols on the batteries with the + and – markings inside the compartment.
4. Slide the battery compartment cover back into place.
CineMate
®
10 system remote
Replace the battery when the remote control stops operating or its range seems
reduced. Use a lithium battery.
1. Using a coin, turn the battery cover slightly left.
2. Remove the cover and insert the new battery (CR2032 or DL2032) flat side up,
with the plus (+) symbol in view.
3. Reseat the cover and turn it right to lock into place.