Filter
Top Products
24 - English
Using the System
Program the remote to control your source
If your source does not support CEC, you can program the remote to control
your source.
1. Power on your source.
2. Locate the code for your source’s brand in the Universal Remote Device Codes
book (provided).
3. On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
For example, to program your TV, press and hold
.
Only the appropriate source button glows.
4. On the number keypad, enter the code for your source’s brand.
Note: If all six buttons blink three times, you entered an invalid code.
Repeat steps 3 and 4.
5. Press + on the volume button.
6. Test the source for basic functions:
• TV: press the channel buttons. Press
. The settings menu appears.
Press
and to navigate.
• Cable/satellite box: press
. The programming guide appears.
Press
and to navigate.
• DVD or Blu-ray Disc
™
player: press . The settings menu appears.
Press
and to navigate.
• Game system: press
and to navigate through your menu.
7. If your source responds to basic functions, press
to save
your settings.
If your source does not respond
Use the remote control’s code scanner to find the code for your source.
1. Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled through all codes for
your source.
2. Test the source for basic functions (see step 6 in “Program the remote to
control your source”).
3. Repeat steps 1 and 2 until your source responds.
4. Press
to save your settings.
Note: Your source may not be compatible with universal remote controls. Refer to
your source owner’s guide for more information.