Filter
Top Products
10
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 EnglishTab2, 10
Manually linking the SoundLink
®
adapter and USB key
If you are using a replacement USB key, or if you are having trouble pairing your computer with
the SoundLink
®
system, you may need to link the devices manually.
1. Using the SoundLink
®
remote control, press the SoundLink/AUX button 1-2 times until
SOUNDLINK appears on the front panel display.
2. Press and hold the Presets 5 button on the remote control until DISCOVERABLE is
displayed and flashing on the Wave
®
system display.
3. With your computer turned on, lift the antenna on
the SoundLink
®
USB key to the vertical
position and plug the key into a USB port on your
computer.
4. Press and hold the button on the USB key for
more than 3 seconds until the light begins to flash.
When the USB power light changes from flashing
to solid and the Wave
®
system emits a beep,
linking is complete.
COMPUTER appears on the front panel display.
USB key button
USB key
antenna