Filter
Top Products
11
English
Making the connections (cont.)
Putting the speakers in the nal location
Loosen the knobs on each speaker to rotate the speakers into the desired position. Then,
tighten the knobs to secure the speaker in its final position (Figures 18A and 18B).
Figures 18A and 18B
Putting the speaker in the final
position
A. Exterior of the house
B. Deck railing or table
A.
B.
Installing Your 251
TM
Speakers
Attaching the rubber feet
If you do not plan to use the supplied brackets to mount your 251 environmental speakers, you
can place them on a sturdy, level surface. They should be standing in the vertical position. Be
sure to attach the rubber feet before using your speakers. For proper balance be sure to place
the feet in the position shown in Figure 19.
Figure 19
Attaching the rubber feet
Rotating the Bose logo
Mounting the speakers on a deck railing or table will require you to rotate the Bose logo. Using
your fingers, gently lift the logo, taking care not to detach it from the speaker, about
1
⁄
4
inch (.24
cm) and turn it 180º.
Figure 20
Rotating the Bose logo