Filter
Top Products
3
TAB 3, 11English TAB 2, 10 TAB 4, 12 TAB 5, 13 TAB 6, 14 TAB 7, 15 TAB 8, 16
For noise reduction and audio
You can use the headphones with a variety of audio
sources: airline audio, a CD, DVD or MP3 player,
a personal or laptop computer, or home stereo.
The maximum input voltage is 9 Vrms.
To enjoy both noise reduction and audio:
1. Gently push the headphones plug all the way into
the connector opening on the left earcup, until the
plug housing is flush with the earcup.
2. Connect the headphones cord to an audio source.
For information on using your headphones on an
airplane, see “Connecting to in-flight entertainment
systems” on page 4.
Note: The LO setting of the LEVEL switch lowers the volume
levels of strong audio output signals which are common on
airline systems. If you find that the volume level is too low,
set the LEVEL switch to HI. The switch has no effect on noise
reduction performance.
3. Put on the headphones. On the right earcup, slide
the power switch forward to the On position. The
battery light indicator will illuminate.
RL
Monaco_book.book Page 3 Wednesday, May 20, 2009 10:52 AM