4
EnglishFrançais Español
SETTING UP
Before you begin
We appreciate your choice of the Bose
®
Acoustimass
®
16 Series II or 15 Series III home !
entertainment speaker system. Each system features a combination of cube speaker arrays,
center front speaker, and a powered Acoustimass module. Together, they reproduce the !
full-spectrum sound of multi-channel digital programming for a powerful and realistic home
theater experience.
Unpacking the carton
Carefully unpack the carton contents as follows:
1. Remove the brown inner carton containing the cube speaker arrays and center front
speaker.
2. Gently roll the large carton onto its side and pull out the Acoustimass module.
WARNING:
To avoid injury, use care in lifting the module, which weighs 33 pounds (15 kg).
Save all packing materials, which provide the best means to transport the system, for !
possible future use.
If any parts appear damaged, do not use them. Instead, repack the system in the original !
carton and contact your authorized Bose dealer. Or, to contact Bose directly, refer to the
address list included in the carton.
Figure 1
Carton contents
Acoustimass module
20-ft (6.1 m)
system input cable
Three 20-ft (6.1 m)
front speaker cables
With Acoustimass 15 Series IIl system
With Acoustimass 16 Series II system
Rubber feet
Four cube array speakers
Five cube array speakers
Two 50-ft (15.2 m)
rear speaker cables
Three 50-ft (15.2 m)
rear speaker cables
Power cord (1)
U.S.A/Canada Europe U.K./Singapore Australia
Center
front speaker
Center
front speaker
Now is a good time to record the serial number for this system on page 2 of this guide and on
your warranty card.
WARNING:
To avoid danger of suffocation, keep the plastic bags that wrap these speakers out
of the reach of children.