Bose 6 Series III Speaker System User Manual


 
4
EnglishFrançais Español
SETTING UP
Before you begin
We appreciate your choice of the Bose
®
Acoustimass
®
6 Series III or Acoustimass 10
Series IV home entertainment speaker system.
The Acoustimass 6 features five small cube speakers, while the Acoustimass 10 system
features four cube speaker arrays and a center front speaker. These speakers, together with
the Acoustimass module, reproduce the full spectrum of multi-channel digital programming
for a powerful and realistic home theater experience.
Unpacking the carton
Carefully unpack the carton contents (Figure 1):
1. Remove the brown inner carton containing the small speakers.
2. Gently roll the carton onto its side and pull out the Acoustimass module.
WARNING: To avoid injury, use care in lifting the module, which weighs roughly 30 lb (14 kg).
Figure 1
Carton contents
Now is a good time to record the serial number of these speakers on your warranty card.
Please save all packing materials for possible future use.
WARNING: To avoid danger of suffocation, keep the plastic bags that wrap these speakers out
of the reach of children.
Powered Acoustimass
module
Three 20-ft (6.1 m)
front speaker cables
With Acoustimass 10 system
Rubber feet for front
center cube speaker
Four cube speaker arrays
Two 50-ft (15.2 m)
rear speaker cables
Power cord (1)
U.S./Canada Europe U.K./Singapore Australia
With Acoustimass 6 system
20-ft (6.1 m)
system input cable
Five cube speakers
Two 50-ft (15.2 m)
rear speaker cables
Center
front speaker
03_Setup.fm Page 4 Tuesday, March 21, 2006 4:05 PM