Filter
Top Products
System Setup
English - 17
4
Interactive box
What you need for the following steps:
Remote control with batteries ADAPTiQ
®
audio calibration headset
IMPORTANT!
Before you start, make sure your speakers and Acoustimass
®
module are in
their final positions.
Do not connect any devices to the control console at this time. The instruc-
tions provided on your TV will tell you when to do this.
A. Slide the battery compartment cover off the back of the remote control.
AA (IEC LR6) batteries (4)
Battery compartment cover
B. Install four AA (IEC LR6) batteries, matching the polarity markings (+ and –)
to the markings inside the battery compartment.
C. Slide the battery cover back into place.