Filter
Top Products
System Setup
English - 15
C. Place the Acoustimass
®
module according to the following guidelines:
• For best sound quality, stand the Acoustimass module on its feet along the
same wall as your TV, or along any other wall in the front third of the room.
• The front opening of the module can face any direction.
• Make sure there is an AC (mains) power outlet nearby.
Acoustimass module
CAUTION: Do not operate the Acoustimass module on its front end, back end,
side, or top.
Note: Be sure to remove all protective films from the Acoustimass module
before operating the system. They may affect acoustic performance
if left in place.
D. Plug the Acoustimass module power cord into an AC (mains) power outlet.
First time startup
What you need:
AA (IEC LR6)
batteries
ADAPTiQ
®
audio
calibration headset
Remote control
Before you start:
• Do not connect any devices to the control console at this time. The instructions
provided on your TV will tell you when to do this.
• Make sure the speaker array and Acoustimass module are in their final positions
before performing the ADAPTiQ audio calibration.