Filter
Top Products
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com
Ceiling Grilles
(Use for CG8A) The ceiling speaker grille shall be a Bogen model CG8A aluminum grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 12-5/8" and
it shall be contoured and finished in satin aluminum. Mounting hardware shall be included.
(Use for CG8AW) The ceiling speaker grille shall be a Bogen model CG8AW aluminum grille,or equivalent,capa-
ble of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be
12-5/8" and it shall be contoured and finished in off-white semi-gloss enamel.Mounting hardware shall be included.
(Use for PG8A) The ceiling speaker grille shall be a Bogen model PG8A aluminum grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it
shall be low profile and finished in satin aluminum. Mounting hardware shall be included.
(Use for PG8U) The ceiling speaker grille shall be a Bogen model PG8U steel grille, or equivalent, capable of pro-
tecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall be
low profile and finished in bright white semi-gloss enamel. Mounting hardware shall be included.
(Use for PG8W) The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable of
protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall
be low profile and finished in off-white semi-gloss enamel. Mounting hardware shall be included.
(Use for SG8W) The ceiling speaker grille shall be a Bogen model SG8W steel grille, or equivalent, capable of
protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13", the speak-
er mounting studs shall be hidden, and the grille shall be low profile and finished in bright white semi-gloss enam-
el. Mounting hardware shall be included.
WB8 Wall Baffle The loudspeaker wall baffle shall be a Bogen model WB8, or equivalent, capable of housing an
8" cone-type loudspeaker and angled (13.5 degrees) for additional downward sound dispersion. The baffle shall be
constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to rein-
force all side corner joints. The speaker opening shall be covered with a black grille cloth. Hardware for mounting
the speaker to the baffle shall be supplied. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D (top) x
3-1/4" D (bottom).
Architect
and Engineer
Specifications