Filter
Top Products
Rear Panel Connectors
1 2 3 4 5 6
1. DC Power: Power supply input.
2. Antenna: Provides 75-ohm FM antenna input.
3. Right/Left Output: Provides separate, 50-ohm right/left outputs.
4. Mono Output: Provides 50-ohm, mono-summed right/left output.
5. Speaker Output: Provides right/left speaker outputs (8-ohm minimum) via
pluggable screw terminals.
6. Antenna: Provides pluggable screw terminal inputs for the AM loop and FM
dipole antennas.
Audio and Menu Select Modes
Audio Mode is selected by pressing the SEL button (7). Entering the Audio
Mode allows the user to adjust Bass, Treble, and Balance settings. Use the Volume
Knob to make the adjustments.
Select the Menu Mode by pressing and holding the same SEL button. The SEL button
then selects the DSP options. Use the Volume Knob to change the settings.
The DSP feature offers three EQ presets: CLASS (Classical), ROCK, and POP,
as well as FLAT (No EQ boost) and OFF options.
CLOCK feature displays the time in 12-hour format.
Note: Disconnecting power to the CDR1 will reset all settings to their factory
defaults.
15. Audio Input Connector: Provides 1/8" Stereo jack for AUX audio source.
16. Band Switch: In radio mode, press button to switch between FM1, FM2,
FM3, AM1, and AM2.
17. Station Adjust/Music Select: Selects station in radio mode, or selects track
in CD mode. Press and hold more than 1 sec. to scan stations/tracks.