Filter
Top Products
6
Mounting and installation
The BZE10A is a Half DIN sized unit. It can be mounted in the dashboard with your head unit in most cases. Use of an auxiliary installation kit is needed
like those made by American international or Scoche products.
The BZE10A is also supplied with mounting brackets giving you the option to mount the equalizer under your dash, or on the console or in your glove
compartment.
There are three power wires coming out of the back of the unit. The Red wire with the inline fuse is for 12 volts DC into the unit. This wire should be
hooked up to an accessory line which turns on only when the car is running or the key of the car is in the accessory position.
The black wire is the ground wire. Attach this wire to either the same ground of your head unit or to a clean chassis point located in the dashboard or on
the fire wall. The shorter the ground wire connection the better chance of not having any interference or noise problems.
The orange wire the remote start for your amplifier. This wire should be attached to the remote turn on circuit of your amplifiers or crossover. This way
when the BZE10A is turned on it will automatically power on your amplifier system.