Filter
Top Products
11
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Switching to radio mode
If you are in CD, CD changer/Compact
Drive MP3 or AUX mode,
➮ press the FM TS button 5 for FM
radio mode.
or
➮ press the AM button ? for AM ra-
dio mode.
Switching the RDS function on/
off
➮ To use the RDS functions, press
the RDS button 4.
The RDS function is active when RDS
lights up in the display with a symbol.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are three memory banks
(FM1, FM2 and FMT) for the FM wave-
band and two memory banks (AM and
AMT) for the AM waveband.
Six stations can be stored in each mem-
ory bank.
To switch between the FM memory
banks,
➮ briefly press the FM TS button 5
repeatedly until the required mem-
ory bank appears in the display.
To switch between the AM memory
banks,
➮ briefly press the AM button ? re-
peatedly until the required memory
bank appears in the display.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮ Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
➮ Press the or button :.
Note:
You can only tune into stations manual-
ly on the FM waveband if the RDS and
PTY functions are deactivated.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “SENS” appears in the display.
➮ Press the button :.
The display shows the currently set sen-
sitivity level. “SENS 6” means that the
tuner is set to the highest sensitivity
setting. “SENS 1” is the lowest setting.
➮ Set the required sensitivity using
the or button :.
RADIO MODE