Filter
Top Products
11
Specifications
Audio Power Specifications
Power Output and Total Harmonic Distortion: 5.5 watts per channel minimum continuous average
output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic
distortion.
Other Specifications
Tuner
FM
Tuning Range: 87.5 - 107.9 MHz
Intermediate Frequency: 10.7 MHz
FM Mono Sensitivity: 13 dBf
Seek lo sensitivity: 51 dBf
Seek sensitivity 31 dBf
Selectivity: 80 dB at 400kHz
Signal-to-Noise Ratio: 65 dB (stereo), 70 dB (mono)
Harmonic distortion at 1 kHz: 0.7% (stereo), 0.5% (mono)
Separation: 30 dB
Frequency Response: 30-15,000 Hz ± 3 dB
AM
Tuning Range: 530 - 1,710 kHz
Seek lo sensitivity 50 dBµV
Seek sensitivity: 25 dBµV
Intermediate Frequency: 450 kHz
Signal-to-Noise Ratio: 50 dB
Frequency Response: 30-5,000 Hz
+ 3dB
Audio
Speaker Impedance: 4-8 ohms
Maximum Amp Power: 4 X 15 Watts (at 4 ohms)
RMS Power: 4 X 5.5 Watts (at 4 ohms) <1% THD
Bass Control: ± 10 dB @ 100 Hz
Treble Control: ± 10 dB @ 10 kHz
Loud: + 8 dB @ 60 Hz & + 2 dB @ 8 kHz
CD Player
Cassette
Signal-to-Noise Ratio: 55 dB
Tape Wow and Flutter: 0.10% dB
Tape Frequency Response: 30-18,000 Hz
+ 3 dB
General
Dimensions (w/o projecting parts/controls): 180 x 52 x 155 mm, 7 x 3 x 6
1
/
8
in.
Mass: Approx. 1.4 kg (3.0 lb.)
Power Requirement (neg. grnd.): 12 V DC car battery (11-16 V DC allowable)
Operating Temperature: 15°F to 120°F, –10°C to 50°C
Supplied Accessories: • Unit
• Faceplate
• Wire Harness
• DIN Sleeve
• Mounting Hardware
• Owner’s Manual in English, French, Spanish and Portuguese
Design and specifications subject to change without notice.