Filter
Top Products
VIDEO INPUT CONNECTIONS
5
The HDMI connection carries both audio and video, although it is possible on the B&K product to
only output one or the other (please see the menu structure for further information). To connect an
HDMI video source to the B&K, connect the HDMI cable to the HDMI output on the source piece.
Then connect the other end of the cable into the corresponding HDMI input on the preamplifier.
Shown is an HDMI output on the source piece going into Input 9 on the B&K.
Video Input Connection - HDMI
The B&K surround preamplifier provides eight sets of component video inputs. Each component
input corresponds to a set of stereo analog inputs, optical digital inputs and coax digital inputs. For
example, Component video input 1 would correspond to Analog Stereo input 1, Optical digital input 1
and Coax digital input 1. The standard component video output would upconvert the input video sig-
nal to 720P, 1080i or 1080P depending on the menu selection. Under default configuration the output
is set to 1080i. Shown above is a component video source going into Input 1 on the B&K.
Video Input Connection - Component Video
The B&K surround preamplifier provides eight sets of component video inputs. These inputs can be
used with the S-Video to RCA adapter that is supplied with the preamplifier in order to upconvert an
S-Video signal to go into the component input. Connect the one end of the S-Video to RCA adapter
to the S-Video output on the source piece. Then connect RCA cables from the adapter to the corre-
sponding colored inputs on the B&K. Shown is an S-Video source connected to the S-Video to RCA
adapter with RCA connections going into the blue and green inputs on Input 3.
Video Input Connection - Composite Video
Video Input Connection - S-Video
The B&K surround preamplifier provides eight sets of component video inputs. These inputs can be
used to upconvert a composite video signal to go into the component input. Connect the composite
video output on the source piece using an RCA cable to the red colored input on the B&K. Shown is
a composite video source with an RCA connection going into the red input on Input 1.
HDMI Source
Component
Source
S-Video
Source
Composite
Source