BenQ W6000 Speaker System User Manual


  Open as PDF
of 6
 
BenQ W6000 RS-232 Programming Guide
(Revision 1)
2 of 6
BenQ W6000 RS-232 Programming Guide
(Revision 1)
2 of 6
Communication Settings
The default settings for the RS-232 COM port are as follows:
Baud Rate: 115,200
Parity: None
Data bits: 8
Stop bits: 1
Flow Control: None
RS-232 Connector Information
The pin-out for the RS-232 control port is as follows:
Pin Description
1 No Connection
2 Receive Data
3 Transmit Data
4 No Connection
5 Ground
6 No Connection
7 RTS (Not needed if Flow Control set to None)
8 CTS (Not needed if Flow Control set to None)
9 No Connection
 previous next