Filter
Top Products
PureAV Power Console
Hookup and Installation
E. Trigger Out: The trigger out function gives you the ability to control an
external device equipped with a remote trigger such as a retractable
movie screen when the Power Console is switched on. The 12-volt DC
OUT port accepts a 1/8” mini plug cable. Set the “Trigger Out” switch to
“Delayed” and the Trigger Out will power an external device after a
delay set by the Delay Time Switch (Fig. 2e). If you do not want a delay
then set the “Trigger Out” switch to “Switched”.
Note: This feature also allows you to remotely control multiple power
consoles using a Remote DC Control Cable. Simply connect the
cable from the "DC OUT" to the "DC IN" on another Power Console.
9
Figure 2a
Figure 2b
Figure 2c
Figure 2d
Figure 2e
Figure 2