Filter
Top Products
Hookup and Installation
Belkin Power Console
10
Step 5
Connect your Coaxial-Cable/DSS Lines
Your Belkin PureAV Power Console comes with one pair of coaxial-cable
connections to protect your system from dangerous electrical disturbances
that can travel down your coaxial-cables lines. You will need additional
coaxial cables to connect the Power Console to your home theater
components.
A. Cable/SAT TV – Connect the incoming cable/SAT television coaxial-
cable line to the connector labeled “Cable/SAT IN”. Connect one end
of a second coaxial cable to the connector labeled “Cable/SAT OUT”.
Connect the other end of this cable to your cable/SAT TV tuner.
Note: We have included labels for the Coax IN and Coax OUT lines if
needed for better organization.
*IMPORTANT WARNING – To sufficiently safeguard all of your
equipment from damage resulting from a power surge, all of your
incoming coaxial-cable lines should be properly grounded. Contact a
licensed electrician to verify that all of your cable lines are properly
grounded to a cold-water pipe or ground rod.