Filter
Top Products
STORAGE
Storage Conditions
Store the UPS covered and upright in a cool, dry location,
with its battery fully charged. Before storing, charge the UPS
for at least four hours. Disconnect any cables connected to
the computer interface port to avoid unnecessary drainage of
the battery.
Extended Storage
During extended storage in environments where the ambient
temperature is +5˚ F to +86˚ F, charge the UPS battery every
six months.
During extended storage in
environments where the
ambient temperature is
+86˚ F to +113˚ F, charge
the UPS battery every three
months. Note:
BATTERY REPLACEMENT
EcoPower Service Program
In the event that the UPS needs a battery replacement, Belkin
offers its EcoPower Service Program. This program offers a
battery replacement on your UPS to ensure it is working properly
in protecting your connected devices. It also ensures that the
battery in the UPS is discarded of properly in an effort to keep our
environment clean. All participants in the program will receive a
two-year extended product warranty. Please call Belkin
Components for detailed information regarding the cost of the
program and shipping procedures.
The Old Battery Must Be Recycled
Deliver the battery to an appropriate recycling facility or return it
to Belkin in the packing carton that came with your new battery.
Additional recycling information is provided with your new battery.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL OR
CONTACT BELKIN COMPONENTS.
Belkin Components ("Belkin") thanks you for choosing one of our
products for your use. This User License Agreement
("Agreement") contains the terms and conditions under which
limited use of the product is licensed to you.
PLEASE READ THIS NOTICE CAREFULLY
DO NOT OPEN THIS ENVELOPE OR USE ANY OF THE SOFTWARE
UNTIL YOU HAVE READ AND AGREED TO THIS AGREEMENT. IF
YOU OPEN THE ENVELOPE, YOU ARE AGREEING TO THE TERMS
AND CONDITIONS SET OUT IN THIS AGREEMENT. IF YOU DO
NOT ACCEPT THESE TERMS AND CONDITIONS, YOU MUST
RETURN THE ENVELOPE UNOPENED AND WITH THE DISKS
INSIDE TO THE PARTY FROM WHOM YOU RECEIVED IT.
SCOPE OF USE: In this Agreement, "software" means all machine
readable software programs and associated files in this package,
all modified versions of and upgrades or improvements to such
programs and all copies of such programs and files. You, a single
user opening this envelope ("You", "you" or "your"), may use the
software on a single central processing unit. You may not rent it,
loan it out, or lease it, nor use it on a multi-user system.
SOFTWARE OPTIONS
Belkin Sentry Bulldog Shutdown Management Software
Belkin Sentry Bulldog Shutdown Management Software receives
communication through the RS232 interface port to perform
monitoring functions, and also provide an orderly shutdown of the
computer in the event of a power failure. Moreover, Belkin Sentry
Bulldog Shutdown Management Software displays all of the
diagnostic symptoms on screen, such as voltage level, frequency,
battery level, etc. The software is available for Windows
®
95,
Windows
®
98, Windows NT
®
V4 or higher, Windows
®
2000,
Windows
®
Me, Unix
®
, and Novell
®
3.X and above.
Interface Kits
Each interface kit includes a special interface cable which is
required to convert status signals from the UPS into signals that
the individual operation system can recognize. The interface cable
must be connected to the (RS232) serial port on the UPS. The
other side of the interface cable can be connected to the DB9
serial port on your PC. For other installation instructions and
features, please refer to the READ.ME file.
Caution: Use only factory supplied or UPS monitoring cable!
Belkin Components USA
800.223.5546
belkin.com
Belkin Components
501 West Walnut St.
Compton • CA • 90220-5221 • USA
Tel: 310.898.1100 • Fax: 310.898.1111
Belkin Components, Ltd.
Unit 13 • Gatelodge Close • Round Spinney
Northampton • NN3 8RX • United Kingdom
Tel: +44 (0) 1604678300 • Fax: +44 (0) 1604678330
Belkin Components B.V.
Diamantlaan 8 • 2132 WV
Hoofddorp • The Netherlands
Tel: +31 (0) 235698765 • Fax: +31 (0) 235612694
CAUTION
• Internal battery voltage is 12V DC. Used CSB HC1217W
(for 350VA), HC 1221W (for 500, 650VA).
• UPS with user-replaceable batteries shall contain
detailed instruction for battery removal and installation.
• The unit is intended for installation in a controlled
environment (temperature controlled, indoor area free
of conductive contaminants).
Sealed lead battery. Battery must be recycled.
For Recycling Information
Inside the USA Call:
(800) Re-Use-Pb (738-7372)
Outside the USA Call:
1 (800) 244-4415
SAFETY
LICENSE: You have the non-exclusive right to use the software.
You are not permitted to copy, modify or transfer the software or
documentation. You may not decompile, disassemble or
otherwise reverse engineer, break down, analyze or modify the
software.
USE AND RESTRICTIONS: You are permitted to make backup
copies of all the software disks for archival purposes only. You
must reproduce the proprietary notice set forth on the disks and
affix them to all backup copies. You are not permitted to use
these programs in connection with a computer service, or to use
the backup copies other than as a replacement for the original
copy.
TERM: This license is effective upon acceptance by opening this
envelope or in any other way using the enclosed software, which
will constitute your acceptance of, and agreement to, this
Agreement, and is effective until terminated. The limited license
in this Agreement will be automatically terminated if you fail to
comply with any of the terms and conditions in this Agreement.
You agree that upon such termination you will immediately
destroy all programs and documentation, including all copies
made or obtained by you.
LIMITED WARRANTY: Except for the limited replacement
warranty with respect to the disks expressly stated in the next
paragraph, THE PRODUCT, SOFTWARE, PROGRAM,
DOCUMENTATION, AND ANY RELATED INFORMATION, GOODS
OR SERVICES ARE PROVIDED "AS IS" WITH NO WARRANTY OR
REPRESENTATION OF ANY KIND WHATSOEVER. BELKIN
HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
The entire risk of the use, results and performance of the
software, program and documentation is borne by you. Should
any or all of the product, software, program, documentation, or
related information, goods or services be defective, misused,
unsuitable or cause or give rise to any harm or liability
whatsoever, you, not Belkin or its associates, dealers or agents,
assume the entire liability, cost of repair, correction or any
payment or other remedy whatsoever. Furthermore, no warranty
or guarantee is made regarding the use or results of the product,
software, program, documentation, or any related information,
goods or services in terms of correctness, accuracy, reliability,
timeliness or otherwise. You use and rely on the program at your
own risk. The following is the only and exclusive warranty and
remedy of any kind: Belkin does warrant that the program disks
are free from physical defects in materials and workmanship
under normal use for a period of one (1) year from the date of
purchase, as evidenced by a copy of the sales receipt. Return the
defective disk or documentation with your receipt directly to
Belkin for a replacement.
DISCLAIMER: Belkin or its associates will in no event be liable (i)
in any amount for lost profits or special, incidental, punitive or
consequential damages, or (ii) for any claim or damage of any
nature, or under any theory, whatsoever, in any amount in excess
of the purchase price you paid for the product. The warranties
and remedies here set are exclusive, and in lieu of all others oral
or written, express or implied. Some jurisdictions do not allow
exclusion or limitation of implied warranties or of liability for
incidental damages, so the foregoing limitations or exclusion
may not apply to you. This warranty gives you specific legal
rights which vary from jurisdiction to jurisdiction. HOWEVER,
YOU WAIVE SUCH RIGHTS, EXCEPT AS EXPRESSLY PROVIDED
UNDER THE TERMS AND CONDITIONS OF THIS AGREEMENT,
TO THE MAXIMUM EXTENT ALLOWED BY LAW.
The license is governed by the laws prevailing in the State of New
York, without regard to its conflicts of laws principles.
ACKNOWLEDGMENT: By opening the package on which this
Agreement is printed, or through which it is visible, you
acknowledge that you have read this Agreement, understand it,
and agree that this agreement is the complete and exclusive
statement of agreement between yourself and Belkin and
supersedes any prior agreements, oral or written, and any other
communications relating to the subject matter of this Agreement.
SEVERABILITY: Any term or provision of this Agreement or any
application thereof which may be prohibited or unenforceable by
law in a particular jurisdiction shall be interpreted and enforced
to the maximum extent allowed in such jurisdiction (which the
parties acknowledge could mean severing the provision from this
Agreement or, if allowed, enforcing it in a narrower form),
without affecting the remainder of this Agreement, or any other
application of such term or provision in such jurisdiction, or
application of such term or provision in any other jurisdiction.
BELKIN COMPONENTS USER LICENSE AGREEMENT
© 2001 Belkin Components. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. P73579
UPS cannot
turn on.
(No alarm, No
LED lights)
UPS does not turn on properly.
Battery inside the UPS is bad.
UPS fault.
Press switch and hold longer
than three seconds.
Replace with the same
type of battery from belkin.com.
Call for service if the above
actions do not solve your
problems.
UPS always at
battery mode.
Power cord is loose.
AC breaker is burned out
or tripped.
AC utility voltage is too high,
too low, or blacked out.
Replace the power cord.
Replace or reset the breaker.
Normal condition.
Backup time
too short.
Battery inside the UPS
is not fully charged.
UPS is overloaded.
The battery is weak.
Charger fault or other reason.
Recharge the battery for
at least six hours.
Remove some un-critical loads.
Replace battery at belkin.com.
Contact service personnel.
Low Battery.
LED blinks
more than 10
seconds.
Battery fault. Contact Belkin.
Low Battery.
LED blinks
more than 10
seconds with
buzzer beeps.
Charger fault. Contact Belkin.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
1. Lay down the UPS. Use your
thumb to open the battery
cover on the bottom of the unit.
TECHNICAL SPECIFICATIONS
INPUT
RATED
CAPACITY
RATED
VOLTAGE
PHASE
FREQUENCY
350VA/
190W
500VA/
300W
650VA/
360W
202-236VAC
Single Phase 50Hz
OUTPUT
VOLTAGE
FREQUENCY
Simulated Sine Wave
50Hz
BATTERY
BACKUP TIME
RECHARGE
TIME
F6C350
Up to 15min
F6C500
Up to 20min
F6C650
Up to 25min
4 Hours to 90%
ENVIRONMENT
TEMPERATURE
HUMIDITY
0~40°C
10 ~ 90%
SAFETY
REGULATION
SAFETY
EMI
UL 1778/C-UL
FCC CLASS B
EMS IEEE C62.41 CATEGORY A
APPEARANCE
DIMENSION
NET WEIGHT
7.1"W x 8.7"D x 2.4"H
2.9 KGS/
6.4 LBS
3.2 KGS/
7 LBS
3.2 KGS/
7 LBS
All specifications are subject to change without prior notice.
MODEL
F6C350-
SER-SB
F6C500-
SER-SB
F6C650-
SER-SB
4. Put the battery cover back
and slide it into position.
3. Insert the replacement gently
into the UPS. Make sure the
battery is well connected!
2. Grasp the tab attached to
the battery and slide the
battery out.
!
Pb
Pb
NONSPILLABLE
BELKIN COMPONENTS USER LICENSE AGREEMENT
MAINTENANCE
• Normally, the life of a battery is 3-5 years. But extreme operating
conditions and environment may shorten its life span.
• When the UPS has been unused for some time, the battery
inside will discharge slightly. It is recommended to plug the UPS
into a wall outlet to let the battery begin charging automatically.
• When cleaning the plastic case or front panel, use only a soft,
dry cloth. If the case or front panel is very dirty, use a neutral,
non-abrasive detergent.
• Do not use alcohol or ammonia-based solutions.
• When moving the UPS, always handle it with care.
P73506-UPS manual S-series.qxd 2/28/01 1:34 PM Page 2