Filter
Top Products
Warning!
Do not connect power to this amplifier yet!
This amplifier, like any electrical component, can be dangerous and cause injury
unless correct handling procedures are observed and used. Before powering
this amplifier it is necessary to read and follow proper setup and use procedures.
Do not open up your eVo amplifier (do not remove the chassis cover). There
are no user serviceable parts inside. Any tampering of internal parts will imme-
diately void your warranty.
Complete and mail the Owner's Registration Card immediately in order to
activate your warranty.
Feedback is taken before the LC filter
and fed back to the digital power
processor. This feedback is used to
insure that any variations in the
switching speed of each output
device are compensated for, optimiz-
ing the linearity of the output stage.
Warm-Up
The eVo amplifier’s sonic perform-
ance will continue to improve over
the first several weeks of operation.
Because of the very low standby
operating power we recommend
continuous power-up unless the sys-
tem is not to be used of an extended
period. This will prolong the amplifi-
er’s life and insure optimum perform-
ance at all times..
Design Features (cont’d)
page 4© 2002-2004 bel canto design, Ltd. eVo User’s Guide 042104