Filter
Top Products
page 5© 2002 bel canto design, Ltd. PRe6 User’s Guide rev082102
The PRe6’s sonic performance will
start to stabilize after approximately
40 hours of continuous power up.
Volume Up - Increases the output
gain in 0.5 dB increments from 0 to
100, 100 being maximum gain. Unity
gain is 84.0.
Volume Down - decreases the output
gain in 0.5 dB decrements.
Balance Left - (available from the
remote only) Shifts balance left in
0.5dB increments and reduces the
volume in the opposite channel
equally. Balance increment is visible
on the left side of the display.
Conditioning
Front Panel and Remote Control
HARD MUTES OUTPUT, DISABLES DISPLAY
AND CONTROLS
VOLUME AND BALANCE CONTROLS AND
NAVIGATION FOR SETUP MENUS
SHUTS OFF DISPLAY
CYCLES THROUGH INPUTS
INPUT SELECTION
PRESS 6 TIMES TO
ACCESS SETUP MENUS
CYCLES THROUGH ZONE 2
AND TAPE OUTPUTS