Filter
Top Products
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
6
Full-range stereo operation with 5.2
floor monitors
This example is a variation of the example above, with the
addition of several VS1220F oor monitors. Two separate
monitor outputs from the mixing console are connected to the
inputs of a stereo power amplier. A VS1220F is connected to
each amplier output, and a second VS1220F is connected to the
parallel outputs of the rst set of VS1220F monitors.
EUROLIVE VS1220F
EUROLIVE VS1220
EUROPOWER EP2000
AUX 1
SEND
LR AUX 2
SEND
EUROPOWER EP2000
XENYX 2442FX
Fig. 5.2 Full-range stereo operation with oor monitors
Two-way stereo operation with a 5.3
crossover, full-range loudspeakers and
subwoofers
Using an external active crossover, the main output signal of a
mixing console is split into two signals. One signal covers the
lower frequency range and the other signal covers the mid and
high frequency range. The recommended crossover frequency is
150 Hz. Then, the mid-high frequency signal is connected to a
stereo power amplier. A VS series loudspeaker is connected to
each of the amplier outputs. The low-frequency signal is
connected to an additional power amplier, which powers two
subwoofers.
EUROLIVE VS1220 EUROLIVE VP1800S
EUROPOWER EP2000
SUPER-X PRO CX2310
XENYX 1202FX
Fig. 5.3 Two-way stereo operation with subwoofers