Filter
Top Products
22
7. SPECIFICATIONS
AUDIO INPUT
Connectors XLR and 1/4" jack
Type RF filtered, servo balanced input
Impedance 50 kOhms balanced, 25 kOhm unbalanced
Max. Input Level +21 dBu balanced and unbalanced (unity gain)
CMRR typ. 40 dB, >55 dB @ 1 kHz
AUDIO OUTPUT
Connectors XLR and 1/4" jack
Type Electronically servo-balanced output stage (optional transformer-
balanced). Automatic level correction for unbalanced use (6 dB).
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Max. Output Level +21 dBu, +20 dBm balanced and unbalanced
SYSTEM SPECIFICATIONS
Bandwidth 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response 0.35 Hz to 200 kHz, +0/-3 dB
Noise >-95 dBu, unweighted, 22 Hz to 22 kHz
THD 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1
0.04 % typ. @ +20 dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk <-100 dB, 22 Hz to 22 kHz
BASS PROCESSOR
Type Dual Mode Bass Processor
Low Mix variable (0 to 6)
MULTIBAND PROCESSOR
Type Natural Sonic processor with VSP (Variable Sound Processing)
NR Sensitivity variable (0 to 6)
Tune variable (1 to 8 kHz)
Process variable (Enhancer to Exciter)
High Mix variable (0 to 6)
SURROUND SECTION
Surround variable (0 to 6)
FUNCTION SWITCHES AND CONTROLS
Shift Switches the frequency of the Bass Processor between Low and
Ultra-Low
Mode Switches the bass sound from Soft to Tight
Auto NR Activates the noise reduction system
In/Out Activates the relay controlled hard-bypass
Solo Monitors the pure effect signal (Solo function)
Surround Activates the surround processor
INDICATORS
Effect 13 LED meter indicates the effect
Function switch LED indiactor for each function switch
7. SPECIFICATIONS