Filter
Top Products
ULTRA-DI DI20
4
+ You should only use the ATTENUATION switch when
your DI20 rather than the mixing console preamp
begins distorting. Otherwise refrain from using this
function to avoid excessive dampening.
The MODE switch lets you select the operating modes of the
DI20. In the 2-CH mode, two independent signals can be
connected to channels 1 and 2 respectively. In LINK mode the
DI-box functions as a splitter: One signal can be fed to the
channel 1 input and split into two balanced signals (at outputs
1 and 2) and an unbalanced signal at CH.1 OUT. The un-
balanced signal can, for example, be connected to an additional
amplifier.
+ When connecting a tube amplifier to the input of the
DI20, please keep in mind that an appropriate load
resistance (e. g. a loudspeaker) must be connected
to the CH.1 OUT (LINK MODE) connector.