Behringer S1220F Speaker User Manual


 
EUROLIVE S1020/S1220/S1220F/S1520/S1530/S1800S
2
Important Safety Instructions
To reduce the risk of electric shock, do not remove the +
top cover (or the rear section). No user serviceable parts
inside. Refer servicing to quali ed personnel.
To reduce the risk of  re or electric shock, do not expose +
this appliance to rain and moisture. The apparatus shall
not be exposed to dripping or splashing liquids and no
objects  lled with liquids, such as vases, shall be placed
on the apparatus.
This symbol, wherever it appears, alerts you to the
presence of uninsulated dangerous voltage inside
the enclosure - voltage that may be suf cient to
constitute a risk of shock.
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions
in the accompanying literature. Please read the
manual.
Read these instructions.1)
Keep these instructions.2)
Heed all warnings.3)
Follow all instructions.4)
Do not use this apparatus near water.5)
Clean only with dry cloth.6)
Be sure to mount your speakers on a solid, stable and 7)
level base or stand. Vibrating fl oors do not provide reliable
support for speaker enclosures or stacks.
Do not install near any heat sources such as radiators, 8)
heat registers, stoves, or other apparatus (including
ampli ers) that produce heat.
Only use attachments/accessories specified by the 9)
manufacturer.
Use only with the cart, stand, tripod, bracket, or table 10)
speci ed by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Refer all servicing to quali ed service personnel. Servicing 11)
is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Do not block any ventilation openings. Install in 12)
accordance with the manufacturer’s instructions.
These service instructions are for use by quali ed +
service personnel only. To reduce the risk of electric
shock do not perform any servicing other than that
contained in the operation instructions.Repairs have to
be performed by quali ed service personnel.