Filter
Top Products
10
PRO MIXER VMX200
3. REAR PANEL
35
FUSE HOLDER/VOLTAGE SELECTOR. Before you connect the equipment to an AC outlet, please be
sure that the voltage displayed corresponds with your local AC voltage. If you should need to replace the
fuse, be sure to replace it with one of the same type and value. Some units allow you to switch between
230 V and 115 V by rotating the fuse holder.
+ Note: To operate the unit at 115 V, you must install a fuse with the double ampere rating.
36
This is the socket for the power cable. The impulse behavior of any given amplifier circuit depends
largely upon the power supplys inherent reserves. All mixers contain numerous operational amplifiers
(op-amps) for processing line-level signals. Due to the restricted performance of their power supplies,
many mixers show stress symptoms when used under extreme conditions, resulting in inferior audio
quality. Thanks to its generously proportioned power supply, this will never happen to your VMX200: The
sound will always be clear, transparent and powerful.
37
SERIAL NUMBER. Please take the time to fill out and return the warranty card within 14 days after the
date of purchase. This will entitle you to all the benefits of our extended warranty. Alternatively, you can
register online at www.behringer.com.