Filter
Top Products
5 V-TONE GMX1200H/GMX212/GMX210/GMX112/GMX110 User Manual
1. Introduction
Thank you for the trust that you have placed in us by buying your V-TONE.
Youhave gotten your hands on a latest-generation guitar amp that sets
completely new standards when it comes to analog modeling.
Our primary goal during development was to simulate the typical sounds of
analog guitar amps, and at the same time give you a powerful sound tool
that you can use exibly. In doing so, we constantly strove to create a piece of
equipment that is intuitive and easy to use.
The demands placed on a guitar amp are nowadays very broad. A guitarist should
oer a wide array of sounds, but at the same time be able to quickly adapt to
specic requirements of various applications—be it home recording, studio,
liveperfor-mances, etc. That’s why it is very important to us to be able to oer
you a maximal sound diversity as well as diverse connection possibilities with our
V-TONE. Fret not: you will quickly master the V-TONE and will be able to quickly
learn how to use all of its capabilities easily and intuitively.
With its up-to-date circuitry, its digital signal processor (DSP) and its integrated
tuner, the V-TONE features the functionality and dependability of a truly modern
guitar amp. Yet it is user-friendly and problem-free as if it were a classic tube
combo. We highly recommend taking your time to truly learn all of the V-TONE’s
functions so you can reach its maximum potential.
1.1 The concept
The BEHRINGER company philosophy guarantees a perfectly thought-out circuitry
concept, with components that were selected without cutting any corners.
Theoperational ampliers that BEHRINGER uses in the V-TONE are some of the
most noise-free operational amps around, and are characterized by extreme
linearity and low distortion. They are complemented by low-tolerance resistors
and capacitors, high-value potentiometers and switches as well as additional
select components.
The robust housing of your V-TONE, with its oversize power supply, gives you the
peace of mind that the V-TONE will hold its own even under the most demanding
stage conditions. The housing is made of high-grade, environment-friendly MDF
wood consisting of multiply impregnated layers.
1.2 Dynamizer technology and
analogmodeling
When an electric instrument is amplied, that’s where you either make it or
break it. Unlike the signals that have been mixed and mastered, the signals of
electric instruments have extremely high signal peaks, placing the dynamic
range of the amp’s circuitry under immense strain. How your amp reacts to these
signal peaks is one of its most dening characteristics.
That’s why we’ve equipped all V-TONE Series amps with our unique Dynamizer
preamplier circuitry. It guarantees a lively sound with a lot of punch, evenwhen
the amp is pushed to its limits. Combine that with our V-TONE analog modeling,
and not only do you have amazingly authentic tube sounds at your ngertips,
you also get the dynamic performance typical of the respective amp type.
Crystal-clear guitar tones come through with transparency, warmth and the
compression typical of tube amps. Even as distortion increases, the sound
remains lively and full of power, without losing any of its assertiveness.
All along, you have full control over the volume. Plainly talking, you can take
the same sound you are used to at your practice room and replicate it in your
bedroom at much more reasonable volume levels, or you can even record
yourselfwhile playing.
◊ This user’s manual will allow you to familiarize yourself with the
control elements of your new V-Tone and learn all of its functions.
After reading this manual, store it where you can easily find it for
future reference.
1.3 Before you get started
1.3.1 Shipment
The V-TONE was carefully packed at the assembly plant to ensure
securetransport.
If the cardboard box is damaged, please inspect the V-Tone equipment
immediately for physical damage.
◊ Damaged equipment should NEVER be sent directly to us.
Please inform the dealer from whom you acquired it immediately as
well as the transportation company from which you took delivery.
Otherwise, all claims for replacement/repair may be rendered invalid.
◊ If the unit needs to be shipped, please always use the original
packaging to avoid damage.
◊ Never let unsupervised children play with the V-TONE or with
its packaging.
◊ Please dispose of all packaging materials in an environmentally-
friendly fashion.
1.3.2 Initial operation
Please make sure that your V-TONE is provided with sucient ventilation,
andnever place it on other ampliers or in the vicinity of a heater to avoid the
riskof overheating.
◊ Before plugging your V-TONE into a power socket, please make sure you
have selected the correct voltage:
The fuse retainer near the power cord connector has three triangular markings.
Two of these triangles point in opposite directions. Your V-TONE is set up for the
voltage indicated near these markings, and can be altered by turning the fuse
mount by 180 degrees. ATTENTION: This does not apply to export models
built for 120 V, for example!
◊ If you use your V-TONE unit with a different voltage, you must change
the fuses accordingly. The correct value of the fuses needed can be
found in the section “Specifications”.
◊ Faulty fuses must be replaced with fuses of appropriate rating,
without exception! The correct value of the fuses needed can be
found in the section “Specifications”.
Power is delivered via the cable that was delivered with the V-TONE.
Allmandatory safety precautions have been adhered to.
◊ Please make sure that all of your equipment is grounded at all times.
For your own protection, you should never tamper with the grounding
of the cable or the unit itself. The unit shall always be connected to a
mains socket outlet with a protective earthing connection.
MIDI connection is established using a standard DIN connector. Data transfer
occurs via isolated opto-couplers. Additional information can be found in
section6 “Installation”.
IMPORTANT NOTES CONCERNING INSTALLATION
◊ The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.