10 MINIFEX FEX800 User Manual
5.3 Footswitch connection
The MINIFEX features a jack for connecting a footswitch. Here, you can connect
any standard footswitch with a ¼" TS connector. As some footswitch models
on the market have a dierent polarity, please be sure to use one that is
appropriately wired. The correct wiring is shown in the illustration below.
strain relief clamp
sleeve
tip
sleeve
pole 1/ground
tip
pole 2
The footswitch connects both poles momentarily
¼" TS footswitch connector
Fig. 5.3: Wiring of a ¼" TS connector for footswitch connection
6. Appendix
6.1 List of eects and parameters
Eect
no.
Eect EDIT Parameter 1
TAP/SELECT
Parameter 2
TAP/SELECT
LED
1 CATHEDRAL Reverb time Brilliance o/on
2 CONCERT Reverb time Brilliance o/on
3 CLUB Reverb time Brilliance o/on
4 CHAMBER Reverb time Brilliance o/on
5 GOLD PLATE Reverb time Brilliance o/on
6 GATED REV Reverb time Brilliance o/on
7 REVERSE Reverb time Brilliance o/on
8 AMBIENCE Room size Brilliance o/on
9 DELAY No. of repetitions Time interval TAP
ashing
(BPM tempo)
10 CHORUS Intensity Tempo TAP ashing (tempo)
11 FLANGER Intensity Tempo TAP ashing (tempo)
12 PHASER Intensity Tempo TAP ashing (tempo)
13 ROTARY Intensity Tempo o/on
14 PITCH SHIFT Semi-tone steps (+/-12) Detune o/on
15 DELAY+REV Delay vs. reverb ratio Time interval TAP
ashing
(BPM tempo)
16 CHORUS+REV Chorus vs. reverb ratio Reverb time o/on
Table 6.1: List of eects and parameters
7. Specications
Input
Type ¼" TS connectors, unbalanced
Impedance approx. 30 kΩ
Output
Type ¼" TRS connectors, impedance balanced
Impedance approx. 220 Ω
Max. output level +10 dBu
In/Out
Type ¼" TS footswitch connector
Digital Processing
Converters 24-Bit Delta-Sigma, 128-times oversampling
Sampling rate 48 kHz
System Specications
Frequency response 10 Hz to 22 kHz, -3 dB
Dynamic range 96 dB, 10 Hz to 22 kHz
Distortion 0,01% typ. @ 0 dBFS
Crosstalk -75 dB @ 1 kHz
Signal-to-noise ratio 10 Hz to 22 kHz <86 dB @ 0 dBu, A-weighted
Power Supply
Mains connection external power supply, 9 V~, 750 mA
Mains voltage
USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
China 220 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power consumption approx. 7.5 W
Dimensions/Weight
Dimensions (H x W x D) approx. 1.9 x 4.7 x 9.6"
approx. 48 x 120 x 242.6 mm
Weight approx. 1.46 lbs / 0.66 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.