Behringer EUROPOWEREP1500 Stereo Amplifier User Manual


 
11
EUROPOWER EP1500/EP2500
5. SPECIFICATIONS
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the
specifications and design of the device may differ from the information given in this manual.
5. SPECIFICATIONS
20 Hz - 20 kHz @ 0.1% THD, both channels driven:
8
per channel
260 W 450 W
4
per channel
400 W 650 W
1 kHz @ 0.1% THD, both channels driven:
8
per channel
280 W 500 W
4
per channel
450 W 750 W
2
per channel
700 W 1200 W
Bridged Mono:
8
, 20 Hz - 20 kHz, 0.1% THD
800 W 1300 W
8
, 1 kHz, 0.1% THD
900 W 1500 W
4
, 1 kHz, 1% THD
1400 W 2400 W
< 0.01% < 0.02%
(at 10 dB below rated output power)
40 x (32 dB) 50 x (34 dB)
(@ 8
)
1.15 V (+3.4 dBu) 1.23 V (+4.0 dBu)
Front:
Rear:
Inputs:
Outputs
Class AB complementary linear
output
Class H complementary linear output
Mains voltage
Breaker
Mains connector
Power consumption
3.5 A (230 V~, 50 Hz) 5 A (230 V~, 50 Hz)
6.7 A (120 V~, 60 Hz) 9.6 A (120 V~, 60 Hz)
Dimensions (H x W x D)
Weight
approx. 15.7 kg (34.6 Ibs) approx. 16.6 kg (36.6 Ibs)
15 A 100 - 120 V
20 Hz - 20 kHz, +0/-1 dB
5 Hz - 50 kHz (at -3 dB points)
Power switch, gain control (channels 1 and 2)
DIP switches (10 x)
10 k
(unbalanced), 20 k
(balanced)
> 300 @ 8
-100 dB
POWER: green LED
CLIP: red LED, 1 per channel
SIGNAL: yellow LED, 1 per channel
Balanced XLR and 1/4" TRS connectors
approx. 3 1/2" (88 mm) x 19" (482.6 mm) x 15 4/5" (402 mm)
Turn-on/off muting, AC coupling
USA/Canada 120 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
General export model 120/230 V~, 50 - 60 Hz
8 A 200 - 230 V
Standard IEC receptacle
“Touch-Proof” binding posts and Neutrik Speakon
®
Continuously variable speed fan, back-to-front air flow
Full short circuit, open circuit, thermal and HF protection
Stable into reactive or mismatched loads