Behringer B612D Speaker User Manual


 
Page 3 of 5
Instant PA System
With just a single EUROLIVE D Series
loudspeaker and a microphone you can
set up an instant sound system. Thanks to
the built-in preamp section, you just
connect a dynamic mic and raise and
lower the volume with the Level control.
Place the speaker on a tabletop or stand,
and power up. It's just that easy. And if
you need more coverage, say for a larger
room or audience, you can add more
active loudspeakers via the convenient
Link Output XLR connector.
Stereo Music System
You can even use two D Series
enclosures for stereo playback of your
music sound les without any additional
hardware. Just plug the appropriate
stereo breakout adapter into your deck's
output jack and run the cables to the
¼" inputs on each loudspeaker. Set the
Level and EQ controls the same on both
enclosures. Voilà, instant party!
Marvelous as Monitors
Thanks to their trapezoidal design,
these cabinets can be laid on their side
providing the ideal angle for onstage
monitor wedge applications. Hookup
is simple, requiring only a single XLR or
¼" cable from the monitor send on your
mixing console and power. Additional
monitors can be chained together via the
XLR Link Output jack on the rear panel.
Massive Power to Size Ratio
At the heart of each B615D and B612D
are two high-current ampliers with a
combined maximum output of 1500 Watts.
These Class-D amps are capable of driving
the speakers to their maximum without
damage or distortion thanks to their internal
active protection circuits. Putsimply,
thesesystems will astound you with their
massive punch, smooth midrange and
articulate top-end.
Custom-Designed Transducers
Let's face it; the transducers (woofers and
tweeters) are the only part of a sound
system you actually hear, so we never
cut any corners here. While some of our
competitors are content to buy o-the-shelf
transducers and plug them into their boxes,
we custom-design and build ours from
scratch. We wind the voice coils, process
the paper pulp into cones—and even
machine our own back plates. This enables
us to control the quality, and frankly to
make better components, like the long-
excursion 12 and 15" LF transducers and
state-of-the-art 1.75" titanium-diaphragm
compression drivers we load into each and
every B612D/B615D.
Continued on next page
Connecting a Microphone
XM8500 Mic
Connecting a Music Player
CD Player
EUROLIVE
B615D/B612D