Behringer B3031A Speaker User Manual


  Open as PDF
of 4
 
Page 4 of 4
behringer.com
For service, support or more information contact the BEHRINGER location nearest you:
BEHRINGER Australia tel.: +61 3 9877 7170, fax: +61 3 9877 7870 BEHRINGER Germany tel.: +49
2154 9206 4149, fax: +49 2154 9206 4199 BEHRINGER Japan tel.: +81 3 5281 1180, fax: +81 3 5281
1181 BEHRINGER Singapore tel: +65 5845 1800, fax: +65 6214 0275 BEHRINGER USA / CANADA
tel: +1 425 672 0816, fax: +1 425 673 7647
B3030A/B3031A
2-Way Active
Studio Monitors
©2009 BEHRINGER International GmbH. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which
may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. energyXT2, energyXTC and the energyXT logo are trademarks of XT Software AS incorporated in
Norway, and are protected under the laws of Norway, and are being used under license by Behringer Holdings (Pte) Ltd and related companies. FOR INTERNAL USE BY BEHRINGER DEALERS ONLY. DO NOT DISTRIBUTE. 985-10000-00360
that stuff , there’s a special treat at the
end), but hearing the TRUTH will make
you a believer. From the “bulletproof”
bass of its Kevlar woofer to the silky
top-end of its ribbon transducer, we
think you’ll agree that nothing in this
class outperforms the B3030A and
B3031A monitors. Compare them to
the competition and own BEHRINGER!
SPECIFICATIONS
B3030A/B3031A
Audio Inputs
XLR connector servo-balanced input
¼" TRS servo-balanced input
Input impedance 10 kΩ
Input Trim –6 dB to +6 dB
Max. input level +22 dBu
TRANSDUCERS
B3030A
High-frequency driver 2" ribbon
Low-frequency driver 6 ¾" diameter Kevlar diaphragm
B3031A
High-frequency driver 2" ribbon
Low-frequency driver 8 ¾" diameter Kevlar diaphragm
AMPLIFIER OUTPUT POWER
Low-frequency range
B3030A
RMS @ 0.1 % THD
(sine wave) 50 W @ 4 Ω
Peak power 75 W @ 4 Ω
B3031A
RMS @ 0.1 % THD
(sine wave) 100 W @ 4 Ω
Peak power 150 W @ 4 Ω
High-frequency range
B3030A
RMS @ 0.1 % THD
(sine wave) 25 W @ 6 Ω
Peak power 35 W @ 6 Ω
B3031A
RMS @ 0.1 % THD
(sine wave) 30 W @ 6 Ω
Peak power 75 W @ 6 Ω
CROSSOVER
B3030A/B3031A
Type active, 4th order Linkwitz-Riley
Crossover frequency 3.6 kHz
SYSTEM SPECIFICATION
B3030A
Frequency response 50 Hz to 24 kHz
Sound pressure level max. 113 dB SPL @ 1 m (pair)
B3031A
Frequency response 50 Hz to 24 kHz
Sound pressure level max. 116 dB SPL @ 1 m (pair)
POWER SUPPLY
Voltage/Fuses
B3030A
100 - 120 V~, 50/60 Hz T 2.0 A H 250 V
220 - 230 V~, 50/60 Hz T 1.6 A H 250 V
B3031A
100 - 120 V~, 50/60 Hz T 5.0 A H 250 V
220 - 230 V~, 50/60 Hz T 2.5 A H 250 V
Power consumption
B3030A max. 110 W
B3031A max. 200 W
Mains connection
B3030A/B3031A Standard IEC connector
Dimensions/Weight
B3030A
Dimensions (HxWxD) 12.50 in x 8.40 in x 8.33 in
315 mm x 215 mm x 210 mm
Weight 22 lb / 10 kg
B3031A
Dimensions (HxWxD) 15.75 in x 9.81 in x 11.38 in
400 mm x 250 mm x 290 mm
Weight 33 lb / 15 kg
BEHRINGER is constantly striving to maintain the highest profes-
sional standards. As a result of these eff orts, modifi cations may be
made from time to time to existing products without prior notice.
Specifi cations and appearance may diff er from those listed or
illustrated.
 previous