Behringer B212D Speaker User Manual


 
Page 5 of 5
©2009 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suf-
fered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN, EUROLIVE and XENYX) mentioned belong to
their respective owners and are not affi liated with BEHRINGER. 985-10000-00401
behringer.com
For service, support or more information contact the BEHRINGER location nearest you:
BEHRINGER Australia tel.: +61 3 9877 7170, fax: +61 3 9877 7870 BEHRINGER Germany tel.: +49
2154 9206 4149, fax: +49 2154 9206 4199 BEHRINGER Japan tel.: +81 3 5281 1180, fax: +81 3 5281
1181 BEHRINGER Singapore tel.: +65 5845 1800, fax: +65 6214 0275 BEHRINGER USA / CANADA
tel.: +1 425 672 0816, fax: +1 425 673 7647
B215D/B212D/
B210D/B208D
15"/12"/10"/8" 2-Way
Active PA Speaker
As you can see, “Bass requirements”
isn’t quite as easy an answer as it
sounds. The larger a room’s cubic
volume, the more energy is required
to achieve a given level of bass. In
other words, when playing the same
tune in a big room versus a small
room, big room = less bass; small
room = more bass. Confused yet?
We suggest that you consult your
BEHRINGER dealer for more advice on
this subject, which is also a good time
to do a listening test —against their
competition and against each other.
Judge for yourself. And then own
BEHRINGER with money to spare.
OUTPUT POWER
Low-frequency range
B208D/B210D
RMS @ 1% THD 145 W @ 8 Ω
Peak power 180 W @ 8 Ω
B212D/B215D
RMS power 280 W @ 8 Ω
Peak power 450 W @ 8 Ω
High-frequency range
B208D/B210D
RMS @ 1% THD 38 W @ 8 Ω
Peak power 42 W @ 8 Ω
B212D/B215D
RMS power 65 W @ 8 Ω
Peak power 100 W @ 8 Ω
SPEAKER POWER CAPACITY
Woofer
B212D
Size 12"
RMS @ 1% THD 250 W @ 8 Ω
Peak power handling 1000 W @ 8 Ω
B215D
Size 15"
RMS @ 1% THD 250 W @ 8 Ω
Peak power handling 1000 W @ 8 Ω
Tweeter
B212D/B215D
RMS @ 1% THD 30 W @ 8 Ω
Peak power handling 120 W @ 8 Ω
AUDIO INPUTS
XLR (servo-balanced)
Sensitivity -40 dBu to +4 dBu
Input impedance 20 kΩ
¼" TRS jack (servo-balanced)
Sensitivity -40 dBu to +4 dBu
Input impedance 20 kΩ
Level control
Input Trim –∞ to + 30 dB
Max. input level +22 dBu
Link
Connector XLR connector
LOUDSPEAKER SYSTEM DATA
B208D/B210D
Frequency response 65 Hz to 20 kHz
Crossover frequency 2.4 kHz
Sound pressure level max. 113 dB SPL @ 1 m
Limiter Optical
Dynamic equalizer Processor-controlled
B212D
Frequency response 65 Hz to 20 kHz
Crossover frequency 2.4 kHz
Sound pressure level max. 125 dB SPL @ 1 m
Limiter Optical
Dynamic equalizer Processor-controlled
B215D
Frequency response 55 Hz to 20 kHz
Crossover frequency 1.9 kHz
Sound pressure level max. 126 dB SPL @ 1 m
Limiter Optical
Dynamic equalizer Processor-controlled
EQUALIZER
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
POWER SUPPLY
Voltage (Fuses)
B208D/B210D
USA / Canada 120 V, 60 Hz (T 4.0 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 2.0 A H 250 V)
Europe 230 V~, 50 Hz (T 2.0 A H 250 V)
Japan 100 V~, 50-60 Hz (T 4.0 A H 250 V)
Power consumption max. 300 Watts
Mains connection Standard IEC connector
B212D/B215D
USA / Canada 120 V, 60 Hz (T 6.3 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 3.15 A H 250 V)
Europe 230 V~, 50 Hz (T 3.15 A H 250 V)
Japan 100 V~, 50-60 Hz (T 6.3 A H 250 V)
Power consumption max. 600 Watts
Mains connection Standard IEC receptacle
DIMENSIONS/WEIGHT
B208D
Dimensions (HxWxD) 14.65 in / 372 mm x 9.80 in / 249 mm x
8.00 in / 205 mm
Weight 14.68 lb / 6.66 kg
B210D
Dimensions (HxWxD) 18.27 in / 464 mm x 11.50 in / 292 mm x
9.61 in / 244 mm
Weight 18.77 lb / 8.52 kg
B212D
Dimensions (HxWxD) approx. 21.7" x 13.6" x 10.6"(approx. 550 mm
x 345 mm x 270 mm)
Weight 31.9 lbs / 14.5 kg
B215D
Dimensions (HxWxD) approx. 27.2" x 17.3" x 13.2"(approx. 690 mm
x 440 mm x 335 mm)
Weight 45.2 lbs / 20.54 kg
BEHRINGER is constantly striving to maintain the highest profes-
sional standards. As a result of these e orts, modi cations may be
made from time to time to existing products without prior notice.
Speci cations and appearance may di er from those listed or
illustrated.