2
EUROLIVE SERIES
SAFETY PRECAUTIONS
For your own safety, as well as that of your colleagues and your audience, please:
- carefully read the following safety precautions and operating instructions prior to operation
- observe the following safety precautions and operating instructions during operation and
- store this manual in a safe place for future reference.
Thank you.
Caution! EUROLIVE speakers are not designed to be suspended!
EUROLIVE SERIES enclosures are designed exclusively for floor-mounted use. Although the enclosures will
withstand rough handling over many years, they are not designed to be suspended. If suspension of the
speakers is unavoidable, please be sure that suitable fixtures are mounted by qualified personnel.
Suspension of your EUROLIVE enclosures will always be at your own risk!
Check the condition of the protective corners:
EUROLIVE loudspeaker enclosures are equipped with interlocking protective corners, which allow for slip-free
stacking. Damaged corners reduce the stability of speaker stacks. Please inspect them at regular intervals
and replace damaged corners immediately.
Safe speaker installation:
- Be sure to mount your speakers on a solid, stable and level base or stand. Vibrating floors (e.g. elements/
components on the stage), as well as tables, chairs or similar objects do not provide reliable support for
speaker enclosures or stacks.
- Setting up your speakers at a distance from the audience area, dance floor, musicians and/or personnel will
minimize the risk of accident.
- Should local conditions prevent you from following these safety precautions, please be sure to secure the
speakers so that they cannot fall or be knocked over. Always consult a P.A. or rigging expert.
Prevention of speaker damage:
Please protect your speakers from damage due to objects or liquids entering the enclosure.
Damage and repair:
EUROLIVE enclosures must be repaired by qualified personnel if:
- objects or liquids have entered the enclosure,
- the speakers have been subject to rain or excessive moisture,
- the enclosure does not work properly or displays obvious performance deterioration or
- the enclosure has been dropped or otherwise physically damaged.
Maintenance:
Maintenance or modifications which may be carried out by the user is defined in the users manual. Any
additional maintenance/repair work should be carried out by qualified service personnel only.