Behringer AT108 Stereo Amplifier User Manual


 
7
ULTRACOUSTIC AT108
5. SPECIFICATIONS
4. AUDIO CONNECTIONS
Except for the microphone input, the inputs and outputs are
laid out as 1/4" connectors. More information about the connectors
can be found in chapter 5, SPECIFICATIONS. Please refer to
Fig. 2.1 and 2.2 to learn about hooking up your amp.
+ Please keep in mind that all the equipment has to
be grounded at all times. For your own protection,
never change or disable the grounding on your
equipment or on the cables! The unit shall always
be connected to the mains socket outlet with a
protective earthing connection.
Fig. 4.1: 1/4" TS plug for the INSTRUMENT INPUT (mono)
Fig. 4.2: 1/4" TRS for headphones or CD input
Fig. 4.3: XLR connections
Fig. 4.4: Stereo adapter cable
Fig. 4.5: Mono adapter cable
5. SPECIFICATIONS
AUDIO INPUTS
Instrument input
Connector 1/4" TS mono connector
Microphone
Connector balanced XLR
CD input
Connector 1/4" TRS stereo connector
AUDIO OUTPUT
Headphone output
Connector 1/4" TRS stereo connector
SYSTEM SPECIFICATIONS
Power amp output 15 Watts
LOUDSPEAKER
Type 8" dual-cone full-range loudspeaker
Impedance 4
Power rating 20 Watts
POWER SUPPLY
Mains voltage
USA/Canada 120 V~, 60 Hz
U.K./Australia 230 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
DIMENSIONS/WEIGHT
Dimensions
(H x W x D) approx. 322 mm (13 1/8")
x 357 mm (14 1/16")
x 162 mm (6 3/8")
Weight approx. 5.6 kg (11 lbs. 3 oz.)
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modifications may be made from time to time to existing
products without prior notice. Specifications and appearance may differ from those
listed or shown.