Filter
Top Products
15PS100
Subwoofer
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
1400 W continuous program power capacity
100 mm (4 in) copper voice coil
35 – 1000 Hz response
94.5 dB sensitivity
Double silicone spider with optimized compliance
Specification
Nominal Diameter 380 (15) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 6.5 Ohm
Nominal Power Handling (2) 700 W
Continuous Power Handling (3) 1400 W
Sensitivity (1W/1m) (4) 94.5 dB
Frequency Range 35 - 1000 Hz
Voice Coil Diameter 100 (4) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 21 (0.83) mm (in)
Magnetic Gap Depth 10.5 (0.4) mm (in)
Flux Density 1.05 T
Thiele & Small Parameters
Fs 33 Hz
Re 5.3 Ohm
Qes 0.33
Qms 4.8
Qts 0.31
Vas 152 (5.3) dm3 (ft3)
Sd 855 (132.5) cm2 (in2)
Eta Zero 1.8 %
Xmax +/- 8 mm
Xvar +/- 8 mm
Mms 145 g
Bl 22.5 Txm
Le 2.1 mH
Mounting and Shipping Info
Overall Diameter 393 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.7 in)
Baffle Cutout Diameter 354 mm (13.9 in)
Depth 168 mm (6.6 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 9.8 kg (11.1 lb)
Shipping Weight 11.1 kg (24.4 lb)
Shipping Box 420x420x200 mm
(16.5x16.5x7.9 in)
1
For different impedances, please ask.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms or 2.0V for 4 ohms
Nominal Impedance