Filter
Top Products
17
GRAPHICAL USER INTERFACE (GUI)
The BBE SYSOMAX software provides a graphical method of programming
on a DS24 or DS26. It can also be used to make changes in real time, if
adjustments are required, during live operation. Full metering and control
of all settings available on the PC.
Because it provides a more graphic and overall view, this method will allow
you to program settings more efficiently than using the front panel naviga-
tion method on the DS24/DS26.
Though the DS24 and DS26 stores up to ten programs, a virtually unlimit-
ed number can be written and stored on a computer with the software
installed.
Programs can be created whether or not the computer is connected to the
DS24 or DS26 processor. However, it must be connected to write or mod-
ify programs to the on-board memory of the processor.
All the functions available on board the unit are duplicated in the software.
8.1 MINIMUM SYSTEM REQUIREMENTS
Your SYSOMAX software has the following minimum system requirements for operation:
•Microsoft Windows 98, ME, NT4, 2000, or XP.
•Personal computer with Pentium 2 or higher processor.
•20 megabytes (MB) of free hard disk space.
•64 MB RAM.
•Computer RS-232 serial port for connecting the DB-9 type serial programming cable to
the computer (if your computer only has USB ports, adapters are commonly available.)
•DB-9 type serial cable for connecting the device to the computer.This cable is included
with the unit. Should it become lost or damaged, replacement cables are available at
electronics and computer supply stores.
8.2 INSTALLING SYSOMAX ON YOUR COMPUTER
To install SYSOMAX from the CD-ROM:
1.Insert the CD-ROM into the computer’s CD-ROM drive.