Filter
Top Products
Make BeoSound 1 stop at a specific time
You can decide in advance how
long you want to listen to the radio.
BeoSound 1 can switch automatically to
standby when you are done.
You set the number of minutes – 15,
30, 45, 60, 90, 120 or 00 – that you
would like the radio to play before it
switches to standby.
Make a Stop Timer
You can set how long the radio is to play
before it switches to standby. The BeoSound 1
can of course be switched to standby before
this Stop Timer is carried out.
Press RADIO to switch on the
radio
Press STOP to set a Stop Timer
The number of minutes before
the radio will switch to standby
is shown in the display
Press STOP again to change the
number of minutes
The number of minutes is shown
in the display
Wait 5 seconds with the time
shown in the display, then the
Stop Timer is stored
Note: The Stop Timer can be cancelled by pressing
CD or STANDBY before the Stop Timer settings are
stored. Also choosing 00 is the same as cancelling
the Stop Timer.
NOTE: The Stop Timer function can only be used
if at least one radio station is stored.
10
RADIO
STOP
15
STOP
30