Filter
Top Products
I 8362
Signature™7SE
Drive units
Frequency response
Sensitivity
Nominal impedance
Crossover frequency
Recommended amplifier power
Frame size
Cut-out size without
pre mount frame
Cut-out size with
pre mount frame
Min depth required
Finishes
Pre-mount frame (optional)
1x 180mm (7in) Kevlar
®
mid/bass1x 25mm
(1in) metal dome high-frequency
40Hz – 20kHz ±3dB
88dB spl (2.83V, 1m)
8Ω
3.5kHz
20W–150W continuous into 8Ω
on unclipped programme.
Height: 373mm (14
3
/4
in)
Width: 285mm (11
1
/4
in)
Height: 330mm (13in)
Width: 245mm (9
5
/8in)
Height: 346mm (13
5
/8in)
Width: 257mm (10
1
/8in)
102mm (4in) From wall surface
Semi-matt white suitable for customising
or pre-painting
PMK™8
Kevlar is a registered trademark of DuPont.
B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.
Copyright © B&W Loudspeakers Ltd. Printed in England.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
B&W Loudspeakers of America, 54 Concord Street, North Reading, MA 01864-2699, USA Tel: (1978) 664 2870 Fax: (1978) 664 4109
http://www.bwspeakers.com