Filter
Top Products
DM620i
Floor-standing loudspeaker system
Product Summary
●
Designed with the more demanding digital sources of the nineties in mind, the 600 series has
earned a reputation for minimal coloration and musical accuracy in audio reproduction.
Successfully capturing the transients found in music meant developing a loudspeaker able to
do justice to the attack of the original audio signal.
Designed by a master of industrial design Dr Kenneth Grange, the cool, dark lines of the
600 series cabinet are perfect partner for contemporary furniture and interior design settings.
●
The bass units have been upgraded with a new cone and surround assembly, injection
moulded with revised materials and geometry. The surround is now moulded directly onto the
cone, forming a welded joint, which is more consistent and far more secure than its glued
equivalent.
●
The response of the improved bass units is significantly smoother and requires less correction
by the crossover network. The number of components has been reduced accordingly, which
helps lessen the degradation of the signal.
Technical highlights
●
B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.
●
The strict acoustic requirements of the cabinet have dictated a front baffle moulding of extra
high rigidity. The polymer has been chosen for its composition and ability to reduce unwanted
resonances to a minimum.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Description
Drive Units
2-way 4th-order, passive radiator digital
monitor system with bi-wiring
1 x 26mm high frequency with metal
dome, high temperature voice coil and
fluid cooling
2 x 200mm bass/midrange with
reinforced polypropylene diaphragm
and 31mm high temperature voice coil
on Kapton® former
Frequency Response
Sensitivity
Nominal Impedance
Power Handling
Dimensions
Finish
58Hz – 20kHz ± 2dB on reference
axis
90dB spl(2.83V 1m)
4 ohms
30W – 150W into 4 ohms on
unclipped programme
Height: 742mm Width: 236mm
Depth: 302mm
Black Zelda