Bowers & Wilkins Active1 Speaker System User Manual


 
Active 1
Active loudspeaker system
Product Summary
Behind the John Bowers Active 1 is a simple but demanding concept: to achieve large
loudspeakers performance from comparatively small enclosures. And these compact
cabinets should be basically convenient in style, to integrate happily into home
environments where space is at a premium.
During the two-year research and development programme, our augmented design
concept. This unique experienced group of engineers had at their disposal the most
sophisticated tools and instrumentation, including in-house computer laser interferometry.
Technical highlights
The Active 1 has three drive units: two 150mm bass drivers, high frequency transducer
employing diminishing sound-source polyamide dome.
Both bass/midrange drivers incorporate an advanced motor system with edge-wound
copper ribbon on Kapton formers - giving superior transient and power-handling
capabilities.
The totally rigid enclosure is built in a laminate of particle board and bitumous pads and is
critically cross-braced. The electronics are housed in an isolated compartment at the back.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks
acknowledged.
www.bwspeakers.com
Drive Units Three, vertically in-line with electronic inter-unit time-
delay correction.
Bass/bass midrange transducers
Diaphragm: 150mm dia bextrene cone heavily
damped with pva compounds.
Voice coil: edgewound ribbon on kapton former
giving safe operating temperatures up to 250˚C.
High frequency transducer
Diaphragm:26mm dia. special polymide, laser
optimised to give diminishing radiating area with
increasing frequency.
Frequency Response
Power consumption
Dimensions
Net Weight
Finish
Free-field at 2m at centre of listening
window. Bass control ‘+’: ±2dB 45Hz
to 18Hz
Off mode: 4W
On mode: zero drive 120W
full drive 400W
Height: 626mm. 860mm with stand
Depth: 355mm. 400mm with grille
Width: 256mm
30kg
Black Ash, Natural Oak, Walnut
Limited edition: Special lacquered finish