Filter
Top Products
Connections and
Installation
The Ayre V-5xe is easy to connect and use. The
following guidelines will ensure that the installation
goes smoothly.
Location
Do not stack the Ayre V-5xe
directly with other components,
as this may restrict the air
flow or induce hum into the
audio circuitry.
A good location for your power amplifier is on the
floor between your loudspeakers, or in an
open-backed cabinet, or on a shelf. The Ayre V-5xe
produces a moderate amount of heat during
operation. Be sure to provide at least three inches
(75 mm) of air space above the amplifier.
It is important to maintain an adequate
supply of air flow to avoid overheating
the amplifier.
Inputs
The Ayre V-5xe can be driven either by a
preamplifier or directly from a line-level source
(e.g., a tuner or CD player) that has a level control.
There are two sets of input connectors on the rear
3