Filter
Top Products
Repeating this procedure will revert the unit back
to the level-sensitive mode, as indicated by the
status LED slowly flashing red (about 1 Hz).
In the pulse-sensitive mode, a positive-going pulse
edge will toggle the amplifier between the
“Standby” and “Operate” states, duplicating the
action of the front-panel switch.
When using the trigger input, the front panel
switch is still operative. However, operating the
unit with the front panel switch may put the unit
out of “sync” with the control device. If this
should occur, simply press the front panel switch
again to restore “sync”.
Channel Configuration
Each channel of the V-6xe is a self-contained
module (except for the power supply). Additional
modules may easily be installed by your authorized
Ayre dealer.
The V-6xe will hold a maximum of six channels.
There are three independent power supplies
installed. One power supply feeds the two left-hand
slots, another feeds the two center slots, and another
feeds the two right-hand slots.
Break-In
100 to 500 hours of music
played through the system will
ensure full break-in.
Due to the manufacturing processes used for the
wires and capacitors, a break-in period is necessary
for the amplifier to reach its full sonic potential.
8