Filter
Top Products
tape outputs are switched on and off at the front
panel. Please refer to the section “Controls and
Operation” for further information.
If a recorder is not installed in
your system, the “Moon” input
performs exactly like the other
unbalanced inputs.
If you are connecting a recorder to your
system, be sure to connect its outputs to
the “Moon” input of the AX-7.
This will prevent the undesired possibility of
creating a feedback loop when making a recording.
Loudspeaker Outputs
The heavy-duty output
terminals of the Ayre AX-7
work best with speaker cables
using spade lugs.
The Ayre AX-7 drives the loudspeakers with
balanced outputs. Since none of the output
terminals are grounded, connecting any of them to
ground may result in damage to the amplifier.
Do not connect the loudspeaker
outputs to any speaker switch-box,
accessory, or test equipment that has a
common ground connection.
5
Volts
50/60 Hertz
300WMax
Tape Out
S2S2 S1S1
B2 B2
B1 B1
¡Attention — Balanced Outputs Do Not Connect Output Terminals to Ground!—
AX-7 Integrated Amplifier
A y r e
Boulder, Colorado USA
Right Channel
Left Channel
S.N.