Filter
Top Products
www.avenview.com
6
1.8 Installation
To setup Avenview C-DVIA-HDMI follow these steps for connecting to a device:
1. Power off display source such as DVD Player, Set-top box
2. Connect your DVI source to DVI input
3. Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack respectively
4. Connect Male to Male HDMI to HDMI Output of C-DVIA-HDMI
5. Connect other end of HDMI cable to TV or projector with HDMI input
6. Plug in 5V DC power cord to power jack of C-DVIA-HDMI
7. Power on C-DVIA-HDMI
8. Power on DVI source and display with HDMI input.
Only HDMI enabled TV sets with underscan / overscan supported can display full active
video accurately. If underscan / overscan is NOT supported, the top, bottom, left and
right border of the active video may be screened and S/PDIF audio may not sound right.
This version does NOT support 8 Channel analog audio applications
S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only
supports 48 KHz audio sample rate.