Filter
Top Products
9
4. Carefully pull the grille cloth away from the frame mounting hole. The
mounting hole must be clear of all obstacles during pin installation.
5. Place the exposed end of the grille pin in the open mounting hole. Check
to insure that the grille cloth is not trapped between the pin and frame. Use a
small hammer and gently tap the new grille pin in place. Then, pull the
insertion tool off the new pin and verify that the pin flange is flush with the
surface of the grille. Please refer to Figure 2.6.
WARNING: Grille pin breakage may result if the grille cloth becomes trapped
between the pin and frame during installation.
6. Reposition the grille cloth that was pulled away from the frame mounting
hole in step 4. The cloth should lay flat and wrinkle-free.
Figure 2.6 - Installing grille pin into INDRA grille frame. Note that after
installation, the grille pin flange is flush with the surface of the grille.