Filter
Top Products
10
5. Place the exposed end of the grille pin in the open mounting hole. Check to
insure that the grille cloth is not trapped between the pin and frame. Use a small
hammer and gently tap the new grille pin in place. Then, pull the insertion tool off
the new pin and verify that the pin flange is flush with the surface of the grille.
Please refer to Figure 2.6.
WARNING: Grille pin breakage may result if the grille cloth becomes
trapped between the pin and frame during installation.
Figure 2.6 - Installing grille pin into Ascendant grille frame. Note that after
installation, the grille pin flange is flush with the surface of the grille.
6. Reposition the grille cloth that was pulled away from the frame mounting hole
in step 4. The cloth should lay flat and wrinkle-free.