Filter
Top Products
6.0 Remote Control
Using the Aurora IRC-7 Remote Control
-3-
1. POWER - Turns on and off the VTune
2. F1 - See Setup Mode section for detail
3. F2 -
4. F3 -
5. MUTE - Toggles the volume mute on/off
6. VOLUME - Ramps the volume up or down
7. CHANNEL - Changes the TV channel + or -
11. TV INPUT - Selects the TV Antenna as the Main source
See Setup Mode section for detail
See Setup Mode section for detail
8. CC - Closed Captioning1&2
9. EDS - Extended Data Service
10. AUDIO - Not Used (Future use)
12. FM INPUT - Selects the FM Antenna as the Main source
13. UP ARROW - Not Used (Future use)
14. DOWN ARROW - Not Used (Future use)
15. LEFT ARROW - FM Scan -
16. RIGHT ARROW - FM Scan +
17. SELECT - Confirms selection. Entering Channel 12 then Select
will immediately change the channel as compared to waiting for the 3
second time out.
18. MENU - Not Used (Future use)
19. INFO - Displays current channel and volume level
20 - 29 Number Keys - Used for direct channel selection
30. SET - Pressing this and one of the Preset buttons within 1.5
seconds stores current channel.
31. LAST - Returns to the last channel selected
32 - 43 Preset Keys - P1 thru P12 selects the stored preset for TV or
FM.
Source Selection
Preset Selections
8
5
2
9
6
3
0
IRC-7
SELECT
POWER
MUTE
VOL
CH
P2
P3
P6
P5
P9
P8
P12
LAST
P11
Presets
F2 F3
FM
V Tune Pro
INFO
EDS
AUDIO
7
4
1
P1
P4
P7
P10
SET
F1
TV
MENU
CC
2
3
8
9
10
11
13
12
15
17
18
14
19
20
21
23
24
26
27
30
29
32
33
35
36
38
39
41
42
4
5
16
22
25
28
31
34
37
40
43
1
6
7